Follow these easy steps to get your Electrolux ZI 9155 A Refrigerator up and running in no time.
Before installing the Electrolux ZI 9155 A or ZI 9225 A refrigerator, ensure the appliance is not damaged from transportation. Do not install a damaged appliance. If any damage is found, contact your retailer immediately.
Place the refrigerator in a suitable location where the ambient temperature corresponds to the climate classification on the rating plate inside the appliance. Ensure that the appliance does not rest on the electrical supply cable.
Ensure the appliance is earthed. If the plug fitted is unsuitable for your socket outlet, it must be replaced with a suitable plug. Any electrical work needed for installation should be performed by a qualified electrician.
If you need to reverse the door opening direction, follow the instructions in the 'Door Reversal' section. This might involve removing transport locks and fixing the door on the desired side.
Before using the refrigerator, clean the inside with lukewarm water and a small amount of bicarbonate of soda (5 ml to 0.5 liter of water). Avoid using soap or detergents as they may leave an odor. Dry the interior thoroughly.
The temperature inside the refrigerator can be set using the thermostat control knob, which offers 6 temperature positions and an 'OFF' position. Adjust the temperature as needed for your requirements.
After installation, let the refrigerator stand for 2 hours before turning it on. This allows the refrigerant to settle properly.